NetBotz Dry Contact Sensor - NBES0304

Universal Sensor that monitors third-party dry contact state sensors.

The Dry Contact Sensor support for the NetBotz 300, 400, and 500 Version 3 appliances enables use of devices such as water sensors, vibration sensors, motion sensors, glass break sensors, UPS and HVAC dry contact alert ports, and more. Dry contact sensor devices detect and report on a predefined state change. The condition is either "off" (no electrical contact) or "on" (electrical contact). On the Dry Contact sensor settings screen, the user can choose whether to alarm on "detected", "none", or not to alarm at all.

The Dry Contact Sensor has a 15-foot cord (included) which provides flexibility for locating the sensor, this has an RJ45 type connection and can be extended to a maximum of 100 feet with a standard CAT5E or CAT6 cable.

Additional readings appear in the Sensor Reading pane on the NetBotz Web interface for each APC External Dry Contact Sensor that is connected to one of the external sensor ports.